DS2250 데이터 시트보기 (PDF) - Dallas Semiconductor -> Maxim Integrated
부품명
상세내역
일치하는 목록
DS2250 Datasheet PDF : 20 Pages
| |||
PROGRAM LOADING CONFIGURATIONS Figure 3
DS2250(T)
SERIAL BOOTSTRAP LOADER
The Serial Program Load Mode is the easiest, fastest, most reliable, and most complete method of
initially loading application software into the DS2250(T) nonvolatile RAM. Communication can be
performed over a standard asynchronous serial communications port. A typical application would use a
simple RS232C serial interface to program the DS2250(T) as a final production procedure. The hardware
configuration which is required for the Serial Program Load Mode is illustrated in Figure 3. Port pins 2.7
and 2.6 must be either open or pulled high to avoid placing the device in a parallel load cycle. Although
an 11.0592 MHz crystal is shown in Figure 3, a variety of crystal frequencies and loader baud rates are
supported, shown in Table 2. The serial loader is designed to operate across a 3-wire interface from a
standard UART. The receive, transmit, and ground wires are all that are necessary to establish
communication with the DS2250(T).
The Serial Bootstrap Loader implements an easy-to-use command line interface which allows an
application program in an Intel hex representation to be loaded into and read back from the device. Intel
hex is the typical format which existing 8051 cross-assemblers output. The serial loader responds to
single character commands which are summarized below:
7 of 20
Share Link: 