AP105-DF6-1822P 데이터 시트보기 (PDF) - HIROSE ELECTRIC

부품명

상세내역

일치하는 목록

AP105-DF6-1822P

3.96mm Pitch Connector Directly Mounted on Board

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHDS pFr6oduScetsriheasve●b3ee.n9d6ismcomntinPueidtc, ohr wCillobne ndiesccotnotinrueDdisroeocn.tPlyleaMseocuhencktethde oprnodBucotsasrtadtus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BPrecautions

1.Recommended soldering

condition

2.Cleaning condition

3.Connecting condition

4.Precations

Flow: 250ç for 3 seconds

Manual soldering: 290ç for 2 seconds

■After soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding

member will be loosened. After soldering, the operation should be performed, after connector returns to room

temperature.

Refer to the "Nylon Connector Use Hand book".

Don't use solvent to degrade the cable jacket like trichloroethane.

In addition, avoid heat cleaning with solvent.

Refer to the "Nylon Connector Use Hand book".

Slight discoloration on the insulating materials will not affect form, fit or function of the connectors.

Refer to "Nylon Connector Use Handbook"

B132

Powered by TCPDF (www.tcpdf.org)

Share Link: