DF22B 데이터 시트보기 (PDF) - HIROSE ELECTRIC
부품명
상세내역
일치하는 목록
DF22B Datasheet PDF : 16 Pages
| |||
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF22 Series●7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
■Product Specifications
Ratings
Current
rating
Voltage
rating
Number of contacts AWG10
1
30A
2
25A
3
25A
4
22A
5
22A
Specification
UL/C-UL
TÜV
AWG12
25A
20A
20A
18A
18A
AWG14
AWG16
20A
15A
18A
15A
18A
15A
15A
13A
15A
13A
AC/DC 1000V
AC/DC 600V
AC/DC 600V
Operating temperature range -35ç to 85ç (Note 1)
Operating humidity range 20% to 80%
Storage temperature range -10ç to 60ç (Note 2)
Storage humidity range 40% to 70% (Note 2)
UL/C-UL/TÜV File No. and Recognition No.
UL
: E52653
C-UL
: E52653
TÜV
: R9950703
Item
Specification
Condition
1. Contact resistance
Contact resistance(Initial value): 5 m ohms max. 20mV max., 1mA
2. Insulator resistance
1000 M ohms min.
1000 V DC
3. Withstanding voltage
No flashover or Insulator breakdown
2500 V AC for 1 minute
4. Insertion-Extraction force (per contact) 0.3N min., 5N max.
Measured with a steel pin of 1.6 x 0.8 ± 0.002 thickness
5. Durability (mating/unmating) Contact resistance of 10 m ohms max.
30 cycles
6. Vibration
No electrical discontinuity of 1 μs. min.
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, duration of 2 hours
7. Shock
No electrical discontinuity of 1 μs. min.
Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.
8. Humidity
9. Temperature cycle
Contact resistance 10 m ohms max.
Contact resistance of 10 m ohms max.
Temperature 40ç ± 2ç, 90% to 95% RH, 96 hours
(-55ç: 30 minutes➝ 5 to 35ç: 5 minutes➝85ç: 30 minutes➝5 to 35ç: 5 minutes) for 5 cycles
10. Resistance to Soldering heat
No deformation of the insulator parts affecting performance
Flow solder temperature 250ç, for 10 seconds
Manual soldering: Soldering iron temperature 300ç, 3 seconds
Note 1: Current rating of header is 30A (1 pos.) and 25A (2 to 5 pos.)
Note 2: Includes temperature rise caused by the current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity
range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Materials
Product
Sockets
Part
Insulator
Material
Polyamide
Finish
Color: Natural white
Crimp contacts
Contacts
High conductivity copper alloy Tin-lead plated
Headers
Insulator
Contacts
Polyamide (Glass reinforced)
High conductivity copper alloy
Color: Natural beige
Tin-copper plated
Note : Standard Color, colors of the differing coupling forms are black for DF22R and red for DF22L.
(Note)
(Note)
Remarks
UL94V-0
----------
UL94V-0
----------
■Ordering Information
●Socket, Header
DF22 B L - 2 S - 7.92 C
1
23
45
6
7
●Contacts
DF22 A - 1416 SCF
1
8
9
10
1 Series name: DF22
2 Form Type
Sockets
Blank : Standard height, standard lock (Type I)
B : Long type, standard lock (Type III)
C : Long type, ergonomic lock (Type IV)
In-line Plugs
Blank : With panel stop
A : Without panel stop
3 Guide key type
Blank : Inside (Color: natural)
R : Right side (Color: black)
L : Left side (Color: red)
4 Number of contacts : 1 to 5
5 Connector type
S
: Socket
DS
: Double-row socket
P
: Header
EP
: In-line plug
DEP : Double-row in-line plug
RS/P : Retainer
6 Contact pitch : 7.92 mm
7 Type of housing
C
: Crimp housing
DSA : Straight header
DS
: Right-angle header
No letter : Retainer
8 Applicable Cable
Blank : UL1430
A : UL1015
9 Applicable Conductor
1416 : AWG 14 to AWG 16
1012 : AWG 10 to AWG 12
10 Packaging
SCF : Socket contacts / Reel
SC : Socket contacts / Bag
PCF : In-line plug contacts / Reel
PC : In-line plug contacts / Bag
2
Share Link: 