DF13-15DS-1.25C 데이터 시트보기 (PDF) - HIROSE ELECTRIC

부품명

상세내역

일치하는 목록

DF13-15DS-1.25C

1.25mm Pitch Miniature Crimping Connector

HIROSE ELECTRIC 

BPrecautions

1. Recommended Temperature

Profile (SMT)

2. Recommended Soldering

Condition (SMT)

3. Recommended Screen

Thickness (SMT)

4. Board Warpage (SMT)

5. Recommended Soldering

5. Condition (Through hole)

6. Cleaning Condition

7. Connection Condition

8. Cautions

Note 1.This process is allowed up to twice under the same condition.

However, the interval between the first and second processes must be maintained at

the room temperature.

Note 2.The temperature indicates the board surface temperature in the connector lead area.

Manual soldering: 290ç for 2 seconds

0.15 to 0.2mm

Max 0.03mm in the connector center area, based on both connector edges

Flow: 250ç for 3 seconds

Manual soldering: 290ç for 2 seconds

Refer to Nylon Connector Use Hand book.

Refer to Nylon Connector Use Hand book.

sCarefully carry out the crimping operation according to "Crimping Condition Sheet" and

"Crimping Quality Standard", because the crimping contact is an extremely small style.

sBe careful for the excessive scoop insertion/extraction, which will cause damage to the

product.

B193

Share Link: