AP105-DF1-2428S 데이터 시트보기 (PDF) - HIROSE ELECTRIC

부품명

상세내역

일치하는 목록

AP105-DF1-2428S

2.5mm Pitch Connector for Discrete Wire Connection

HIROSE ELECTRIC 

BDF1 Connection Press

Part Number

CL No. Height Width Depth Weight

DF1 Connection Press HP513 550-0134-4 200mm 260mm 250mm 3.7kg

Note:The intermediate connection can be established by removing the

cable cuttingblade of this press machine.

Note:Select a protector after inspecting a cable Jacket diameter for use.

Protector Type Applicable Jacket Diameter Recommended Cable

DF1-*A1.33

Ø1.35 to Ø1.45

UL1007 AWG24

DF1-*A1.05

Ø1.1 to Ø1.35

UL1007 AWG26, 28

* indicates contact No.

DF1 Connection Press HP513

BDF1 Cable Crimper

Part Number

CL No.

DF1 Cable Crimper

550-0130-3

Used to install the cable in the protector.

DF1 Cable Crimper

BPrecautions

1. Recommended Soldering Condition Flow: 250ç for 3 seconds

Manual soldering: 290ç for 2 seconds

2. Cleaning Condition

Refer to Nylon Connector Use Hand book.

3. Connection Condition

[Crimping]

Refer to Nylon Connector Use Hand book.

[ID]

qFor the insulation displacement tool, set a set of connector per insulation displacement. If more

than 2 connectors have been set, they interrupt each other, which will cause an insulation

displacement failure.

qAfter the insulation displacement, make sure that the locks on both protector sides are

completely activated.

B152

Share Link: