SAA7184AWP 데이터 시트보기 (PDF) - Philips Electronics
부품명
상세내역
일치하는 목록
SAA7184AWP Datasheet PDF : 45 Pages
| |||
Philips Semiconductors
Digital Video Encoder (EURO-DENC2)
Preliminary specification
SAA7182A; SAA7183A
FEATURES
• Monolithic CMOS 3.3 V device with 5 V input stages
• Digital PAL/NTSC/SECAM encoder
• System pixel frequency 13.5 MHz
• Accepts MPEG decoded data on 8-bit wide input port.
Input data format Cb, Y, Cr etc. “(CCIR 656)” or
Y and Cb, Cr on 16 lines
• Three DACs for CVBS, Y and C operating at 27 MHz
with 10 bit resolution
• Three DACs for RGB operating at 27 MHz with 9 bit
resolution, RGB sync on CVBS and Y
• Analog multiplexing between internal RGB and external
RGB on-chip
• CVBS, Y, C and RGB output simultaneously
• Closed captioning and teletext encoding including
sequencer and filter
• Line 23 wide screen signalling encoding
• On-chip Cr, Y, Cb to RGB dematrix, including gain
adjustment for Y and Cr, Cb, optionally to be by-passed
for Cr, Y, Cb output on RGB DACs
• Fast I2C-bus control port (400 kHz)
• Encoder can be master or slave
• Programmable horizontal and vertical input
synchronization phase
• Programmable horizontal sync output phase
• Internal Colour Bar Generator (CBG)
• Overlay with Look-Up Tables (LUTs) 8 × 3 bytes
• Macrovision Pay-per-View copy protection system as
option, also used for RGB output.
This applies to SAA7183A only. The device is protected
by USA patent numbers 4631603, 4577216 and
4819098 and other intellectual property rights. Use of
the Macrovision anti-copy process in the device is
licensed for non-commercial home use only.
Reverse engineering or disassembly is prohibited.
Please contact your nearest Philips Semiconductor
sales office for more information
• Controlled rise/fall times of output syncs and blanking
• Down-mode of DACs
• PQFP80 or PLCC84 package.
GENERAL DESCRIPTION
The SAA7182A; SAA7183A encodes digital YUV video
data to an NTSC, PAL, SECAM CVBS or S-Video signal
and also RGB.
Optionally, the YUV to RGB dematrix can be by-passed
providing the digital-to-analog converted Cb, Y, Cr signals
instead of RGB.
The circuit accepts CCIR compatible YUV data with
720 active pixels per line in 4 : 2 : 2 multiplexed formats,
for example MPEG decoded data. It includes a sync/clock
generator and on-chip Digital-to-Analog Converters
(DACs).
The circuit is compatible to the DIG-TV2 chip family.
ORDERING INFORMATION
TYPE
NUMBER
SAA7182AWP;
SAA7183AWP
NAME
PLCC84
QFP80
PACKAGE
DESCRIPTION
plastic leaded chip carrier; 84 leads
plastic quad flat package; 80 leads (lead length 1.95 mm);
body 14 × 20 × 2.8 mm
VERSION
SOT189-2
SOT318-2
1996 Oct 02
2
Share Link: 