BD64550EFV 데이터 시트보기 (PDF) - ROHM Semiconductor

부품명

상세내역

일치하는 목록

BD64550EFV

System Driver for Ink Jet Printers

ROHM Semiconductor 

BD64550EFV

Technical Note

○Soft start

As shown in Fig.24, VOUTDCDC output voltage becomes up and run step by step with soft start at the time of power-on.

VM voltage

VMPORH

CLK195

(Internal)

Counter output

Oscillation

1 2 3 4 5 ・・ ・・・・・49・・・ ・・63 64

SWOUT

DAC output

VOUTDCDC output voltage

~Duty increase~

T1=23.6[msec]

T2=32.8[msec]

Constant ON Duty

ON Duty= VDCOUT/VM

1.21V

0.90V

0V

5.0Vor3.3V

0V

Fig.24 Soft Starting Time Timing Chart

This soft start method is realized by changing comparator positive side voltage that determines output duty of switching

regulator to linear using DAC.

Soft start time T1 is constant value regardless of VM voltage.

Soft start time

T1=23.6msec(typ.)

Count finish time

T2=32.8msec(typ.)

○Series regulator operation

Inputting switching regulator output into RIN pin (pin 16) enables to drive series regulator circuit.

At the time of power-on, output voltage start up step by step with soft starting at the same timing as switching regulator

circuit.^Soft start time is 23.6ms (Typ.).

Regarding external capacitor of ROUT pin (pin 14), it works normally without setting. But switching noise of switching

regulator becomes easy to get in due to dragging on board pattern and the like. Pay attention to switching noise.

RIN

Switching regulator

Regulator

0.9V

ROUT

Internal CLK

1.95kHz

SS

COUNTER

DAC

20kΩ

(typ.)

30kΩ

(typ.)

Fig.25 Series Regulator Block Diagram

www.rohm.com

© 2010 ROHM Co., Ltd. All rights reserved.

10/16

2010.06 - Rev.A

Share Link: