AP7340(2013) 데이터 시트보기 (PDF) - Diodes Incorporated.
부품명
상세내역
일치하는 목록
AP7340 Datasheet PDF : 15 Pages
| |||
AP7340
Pin Descriptions
Pin Name
VOUT
GND
EN
PIN No
X2-DFN1010-4
1
2
3
VIN
4
Thermal PAD
Function
Power Output Pin
Ground
Enable pin. This pin should be driven either high or low and must not be floating. Driving this pin
high enables the regulator, while pulling it low puts the regulator into shutdown mode
Power Input pin
In PCB layout, prefer to use large copper area to cover this pad for better thermal dissipation, then
connect this area to GND or leave it open. However do not use it as GND electrode function alone.
Functional Block Diagram
AP7340 (Non discharge)
AP7340D (with discharge)
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
VIN
VCE
VOUT
IOUT
PD
TA
TSTG
Parameter
Input Voltage
Input Voltage EN
Output Voltage
Output Current
Power Dissipation
Operating Temperature
Storage Temperature
Ratings
Unit
6.0
V
6.0
V
-0.3 to VIN +0.3
V
300
mA
400
mW
-40 to +85
°C
-55 to +125
°C
Note:
4. a). Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may
affect device reliability.
b). Ratings apply to ambient temperature at 25°C . The JEDEC High-K board design used to derive this data was a 2 inch x 2 inch multilayer board
with 1-ounce internal power and ground planes and 2-ounce copper traces on the top and bottom of the board.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
VIN
IOUT
TA
Parameter
Input Voltage
Output Current
Operating Ambient Temperature
Min
Max
Unit
1.7
5.25
V
0
150
mA
-40
+85
°C
AP7340
Document number: DS35282 Rev. 2 - 2
2 of 15
www.diodes.com
October 2013
© Diodes Incorporated
Share Link: 