AKD4589-B 데이터 시트보기 (PDF) - Asahi Kasei Microdevices

부품명

상세내역

일치하는 목록

AKD4589-B

AK4589 Evaluation Board Rev.2

Asahi Kasei Microdevices 

ASAHI KASEI

[AKD4589-B]

EVALUATION BOARD MANUAL

„ Operation sequence

1) Set up the power supply lines. (See “Other jumpers set-up”.)

Name Color Voltage

Used for

+12V Red +12∼+15V Regulator ,I/OBuffer(Op-amp)

-12V

AGND

Blue

Black

-12∼-15V I/O Buffer(Op-amp)

0V

Analog Ground

DGND Black

0V

Digital Ground

Comment and attention

Power supply for Regulator,I/OBuffer(Op-amp).

It should be always connected.

Power supply for I/OBuffer(Op-amp).

It should be always connected.

Analog Ground. It should be always connected.

Digital Ground. It should be connected when JP1

is open. This connector can be open when JP1 is

short.

Table 1. Set up of power supply lines

(Note)Each supply line should be distributed from the power supply unit.

2) Set-up of evaluation modes, jumper pins and DIP switches. (See the followings.)

3) Power on

AK4589 should be reset once after power-on of AKD4589-B.

Set SW1 (PDN) “L” once for power down of AK4589 after power-on of AKD4589-B.

And then set SW1 (PDN) “H”.

<KM076201>

-2-

2005/07

Share Link: