AKD5367A 데이터 시트보기 (PDF) - Asahi Kasei Microdevices
부품명
상세내역
일치하는 목록
AKD5367A Datasheet PDF : 28 Pages
| |||
[AK5367A]
ABSOLUTE MAXIMUM RATINGS
(VSS1=VSS2=0V; Note 1, Note 2)
Parameter
Symbol
min
Power Supplies:
Analog
AVDD
−0.3
Digital
DVDD
−0.3
Charge Pump
CVDD
−0.3
Input Current, Any Pin Except Supplies
IIN
-
Analog Input Voltage(LISEL,RISEL,LIN1-4, RIN1-4 pins)
VINA
−0.3
Digital Input Voltage
(Note 3)
VIND
−0.3
Ambient Temperature (Powered applied)
Ta
−20
Storage Temperature
Tstg
−65
Note 1. All voltages with respect to ground.
Note 2. VSS1 and VSS2 must be connected to the same analog ground plane.
Note 3. PDN, SCL, SDA, MCLK, BICK, LRCK pins
max
6.0
6.0
4.0
±10
AVDD+0.3
DVDD+0.3
85
150
Units
V
V
V
mA
V
V
°C
°C
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
RECOMMENDED OPERATING CONDITIONS
(VSS1=VSS2=0V; Note 1)
Parameter
Symbol
min
typ
max
Units
Analog
AVDD
4.5
5.0
5.5
V
Power Supplies Digital
DVDD
3.0
3.3
3.6
V
(Note 4) Charge Pump
CVDD
3.0
3.3
3.6
V
DVDD-CVDD
ΔVDD
-0.3
0
+0.3
V
Note 4. The power up sequence between AVDD, DVDD and CVDD is not critical.
In slave mode, the AK5367A must be power up at the PDN pin = “L”.
In master mode, the AK5367A must be power up at the PDN pin = “L”, or when DVDD is powered up, MCLK
clock must input and the AK5367A must be reset by the PDN pin=“L”. The internal register data is unknown until
PDN pin=“L”. The power on/off sequence between AVDD, DVDD and CVDD is not critical, however when
DVDD is powered off, all digital input pins must be left floating or held to VSS.
The power off is means that AVDD, CVDD and DVDD are floating or short to VSS.
WARNING: AKEMD assumes no responsibility for the usage beyond the conditions in this datasheet.
MS0967-E-00
-6-
2008/05
Share Link: 