ADSP-2185MKCA-300 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

일치하는 목록

ADSP-2185MKCA-300

DSP Microcomputer

Analog Devices 

ADSP-2185M

Memory Interface Pins

The ADSP-2185M processor can be used in one of two modes: Full Memory Mode, which allows BDMA operation with full exter-

nal overlay memory and I/O capability, or Host Mode, which allows IDMA operation with limited external addressing capabilities.

The operating mode is determined by the state of the Mode C pin during RESET and cannot be changed while the processor is running.

The following tables list the active signals at specific pins of the DSP during either of the two operating modes (Full Memory or

Host). A signal in one table shares a pin with a signal from the other table, with the active signal determined by the mode set. For the

shared pins and their alternate signals (e.g., A4/IAD3), refer to the package pinout tables.

Full Memory Mode Pins (Mode C = 0)

Pin Name

# of Pins

I/O

A13:0

14

O

D23:0

24

I/O

Function

Address Output Pins for Program, Data, Byte, and I/O Spaces

Data I/O Pins for Program, Data, Byte, and I/O Spaces (8 MSBs are also

used as Byte Memory Addresses.)

Host Mode Pins (Mode C = 1)

Pin Name

# of Pins

I/O

Function

IAD15:0

16

A0

1

D23:8

16

IWR

1

IRD

1

IAL

1

IS

1

IACK

1

I/O

IDMA Port Address/Data Bus

O

Address Pin for External I/O, Program, Data, or Byte Access1

I/O

Data I/O Pins for Program, Data, Byte, and I/O Spaces

I

IDMA Write Enable

I

IDMA Read Enable

I

IDMA Address Latch Pin

I

IDMA Select

O

IDMA Port Acknowledge Configurable in Mode D; Open Drain

NOTE

1In Host Mode, external peripheral addresses can be decoded using the A0, CMS, PMS, DMS, and IOMS signals.

REV. 0

–7–

Share Link: