XE2476 데이터 시트보기 (PDF) - Xecom
부품명
상세내역
일치하는 목록
XE2476 Datasheet PDF : 12 Pages
| |||
AT Command List (continued)
Mn - Speaker Activity -
n=0 Speaker off
n=1 Speaker on until carrier received*
n=2 Speaker remains on
n=3 Speaker on after dialing until carrier
is detected.
&Dn - DTR
n=0 DTR is ignored by the modem*
n=2 Modem disconnects if the host
revokes DTR.
n=3 The modem performs a soft reset
when DTR is revoked.
On - On Line
n=0 Return On Line with no retrain*
n=1 Initiate retrain while returning On
line.
Qn - Responses
n=0 Send responses *
n=1 No Responses
Sr? - Interogate Register -
Sr=n - Set Register Value -
Vn - Result Codes -
n=0 Numeric Result Codes
n=1 English Word Result Codes*
Xn - Result Code Set -
n=0 Responses 0-4*
n=1 Responses 0-5 & 10
n=2 Responses 0-6 & 10
n=3 Responses 0-5, 7 & 10
n=4 Responses 0-7 & 10
Z - Reset -
&Cn - DCD Operation
n=0 DCD is forced active*
n=1 DCD indicates a valid carrier signal
&F - Revert to Factory Defaults
&Ln - Line Type
n=0 Modem operates on dial-up lines*
n=1 Modem operates on leased lines
&Qn - Communications Format
n=0 Sets the modem for normal,
unbuffered operation.
&Tn - Test Modes
n=0 Exit test mode
n=1 Local analog loopback
n=3 Initiate local digital loopback
n=4 Respond to remote loop request*
n=5 Deny remote loop request
n=6 Intiate a Remote Digital loopback
n=7 Remote digital loopback w self-test
n=8 Local analog loopback w self-test
&V - View Active Profile -
&Wn - Store Profile -
n=0 Stores the current configuration in
memory location 0.
n=1 Stores the current configuration in
memory location 1.
&Yn - Recall Profile
n=0 Use memory location 0.
n=1 Use memory location 1.
&Zn=X- Store Number
6/XECOM
XE2476
Share Link: 