AD7457(Rev0) 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

일치하는 목록

AD7457
(Rev.:Rev0)

Low Power, Pseudo Differential, 100 kSPS 12-Bit ADC in an 8-Lead SOT-23

Analog Devices 

AD7457

ABSOLUTE MAXIMUM RATINGS

TA = 25°C, unless otherwise noted.

Table 3.

Parameters

Rating

VDD to GND

−0.3 V to +7 V

VIN+ to GND

−0.3 V to VDD + 0.3 V

VIN– to GND

−0.3 V to VDD + 0.3 V

Digital Input Voltage to GND

−0.3 V to +7 V

Digital Output Voltage to GND

−0.3 V to VDD + 0.3 V

VREF to GND

−0.3 V to VDD + 0.3 V

Input Current to Any Pin except

Supplies1

±10 mA

Operating Temperature Range

Commercial (B Version)

−40°C to +85°C

Storage Temperature Range

−65°C to +150°C

Junction Temperature

150°C

θJA Thermal Impedance

211.5°C/W (SOT-23)

θJC Thermal Impedance

91.99°C/W (SOT-23)

Lead Temperature, Soldering

Vapor Phase (60 s)

215°C

Infrared (15 s)

220°C

1Transient currents of up to 100 mA do not cause SCR latch-up.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those listed in the operational sections

of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

TO

OUTPUT

PIN

CL

25pF

IOL

1.6mA

1.6V

IOH

200µA

Figure 3. Load Circuit for Digital Output Timing Specifications

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the

human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. 0 | Page 6 of 20

Share Link: