datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

A29010V-55 데이터 시트보기 (PDF) - AMIC Technology

부품명
상세내역
일치하는 목록
A29010V-55 Datasheet PDF : 30 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
A29010 Series
Sector
A16
SA0
0
SA1
0
SA2
1
SA3
1
Table 2. A29010 Block Sector Address Table
A15
Sector Size (Kbytes)
0
32
1
32
0
32
1
32
Address Range
00000h - 07FFFh
08000h - 0FFFFh
10000h - 17FFFh
18000h - 1FFFFh
Autoselect Mode
The autoselect mode provides manufacturer and device
identification, and sector protection verification, through
identifier codes output on I/O7 - I/O0. This mode is primarily
intended for programming equipment to automatically
match a device to be programmed with its corresponding
programming algorithm. However, the autoselect codes
can also be accessed in-system through the command
register.
When using programming equipment, the autoselect mode
requires VID (11.5V to 12.5 V) on address pinA9. Address
pins A6, A1, and A0 must be as shown in Autoselect
Codes (High Voltage Method) table. In addition, when
verifying sector protection, the sector address must appear
on the appropriate highest order address bits. Refer to the
corresponding Sector Address Tables. The Command
Definitions table shows the remaining address bits that are
don't care. When all necessary bits have been set as
required, the programming equipment may then read the
corresponding identifier code on I/O7 - I/O0.To access the
autoselect codes in-system, the host system can issue the
autoselect command via the command register, as shown
in the Command Definitions table. This method does not
require VID. See "Command Definitions" for details on
using the autoselect mode.
Table 3. A29010 Autoselect Codes (High Voltage Method)
Description
A16 - A15 A14 - A10 A9 A8 - A7 A6 A5 - A2 A1 A0
Manufacturer ID: AMIC
X
X
VID
X
VIL
X
VIL VIL
Device ID: A29010
X
X
VID
X
VIL
X
VIL VIH
Sector Protection
Verification
Sector
X
VID
X
VIL
X
VIH VIL
Address
Continuation ID
X
X
VID
X
VIL
X
VIH VIH
Note: CE =VIL, OE =VIL and WE =VIH when Autoselect Mode
Identifier Code on
I/O7 - I/O0
37h
A4h
0lh (protected)
00h (unprotected)
7Fh
PRELIMINARY (August, 2001, Version 0.3)
6
AMIC Technology, Inc.

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]