A1974 데이터 시트보기 (PDF) - Hamamatsu Photonics
부품명
상세내역
일치하는 목록
A1974 Datasheet PDF : 8 Pages
| |||
PERIPHERAL EQUIPMENT
Light-emitting
phenomenon
¶Input section
§Optical trigger
Streak camera
•Trigger unit
6 Optical Trigger (PIN diode head)
• PIN Diode Head C1083-01 (for Low Repetition)
7 Input Section
• Spectroscopes C5094 and C5095
Spectral response
Rise time
Dimensions/weight
Power supply
400 nm to 1100 nm
0.8 ns
Head: 100 (W) × 160 to 235 (H) × 50 (D) mm/400 g
Power supply unit: 100 (W) × 83(H) × 100 (D) mm/400 g
+22.5 V (battery)
• PIN Diode Head C1808-03 (for High Repetition)
Minimum input level
Saturation output level
Frequency band
Power supply
1 mW (f=80 MHz, λ=800 mm, FWHM<1 ps)
Approx. 1.5 Vp-p (50 Ω)
<100 MHz
INPUT Voltage range 100 V to 240 V Input
power supply frequency range 50/60 Hz
6
C5094
C5095
Optical layout
Czerny-Turner model
(with toroidal mirror for aberration correction)
Focal distance
250 mm
500 mm
F value
4
8
Incident light slit width
Variable between 10 µm to 2,000 µm
Grating
Up to 3 can be installed simultaneously
Reciprocal dispersion
2.5 nm/mm
1.5 nm/mm
(when using 1200 gr/mm) (when using 1200 gr/mm)
Wavelength resolution
< reciprocal dispersion × 0.06
The following are needed in order to connect these units to the C5680:
• A spectroscope mounting table
• A spectroscope adaptor
• A light source for wavelength axis calibration (mercury lamp, etc.)
• Fiber-optic Input Optics System (FC Connector) A6368
This fiber-optic input optics system can be connected in place of
theincident light slit in the C5680.
• Objective Lens
Connecting a C-mount adaptor to the incident light slit section of the
C5680 enables attachment of a C-mount objective lens. F-mount ob-
jective lenses can also be attached using an FC converter.
Share Link: 