TH58100FT 데이터 시트보기 (PDF) - Toshiba
부품명
상세내역
일치하는 목록
TH58100FT Datasheet PDF : 43 Pages
| |||
TH58100FT
Reset
The Reset mode stops all operations. For example, in the case of a Program or Erase operation the internally
generated voltage is discharged to 0 volts and the device enters Wait state.
The response to an “FFH” Reset command input during the various device operations is as follows:
When a Reset (FFH) command is input during programming
80
10
FF
Figure 8.
00
Internal VPP
RY/BY
tRST (max 10 ms)
When a Reset (FFH) command is input during erasing
D0
FF
Internal erase
voltage
Figure 9.
00
RY/BY
tRST (max 500 ms)
When a Reset (FFH) command is input during Read operation
00
FF
Figure 10.
00
RY/BY
tRST (max 6 ms)
When a Status Read command (70H) is input after a Reset
FF
70
RY/BY
Figure 11.
I/O status: Pass/Fail ® Pass
Ready/Busy ® Ready
FF
70
RY/BY
When two or more Reset commands are input in succession
(1)
FF
I/O status: Ready/Busy ® Busy
Figure 12.
(2)
(3)
FF
FF
RY/BY
The second FF command is invalid, but the third FF command is valid.
2001-03-05 31/43
Share Link: 