AOTF12N50 데이터 시트보기 (PDF) - Alpha and Omega Semiconductor
부품명
상세내역
일치하는 목록
AOTF12N50 Datasheet PDF : 6 Pages
| |||
AOT12N50/AOB12N50/AOTF12N50
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
Conditions
Min Typ Max Units
STATIC PARAMETERS
BVDSS Drain-Source Breakdown Voltage
BVDSS
/∆TJ
Zero Gate Voltage Drain Current
ID=250µA, VGS=0V, TJ=25°C
ID=250µA, VGS=0V, TJ=150°C
ID=250µA, VGS=0V
500
600
0.54
V
V/ oC
IDSS
Zero Gate Voltage Drain Current
VDS=500V, VGS=0V
VDS=400V, TJ=125°C
IGSS
Gate-Body leakage current
VDS=0V, VGS=±30V
VGS(th) Gate Threshold Voltage
VDS=5V ID=250µA
RDS(ON)
gFS
VSD
Static Drain-Source On-Resistance
Forward Transconductance
Diode Forward Voltage
VGS=10V, ID=6A
VDS=40V, ID=6A
IS=1A,VGS=0V
IS
Maximum Body-Diode Continuous Current
ISM
Maximum Body-Diode Pulsed Current
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Coss
Output Capacitance
VGS=0V, VDS=25V, f=1MHz
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
VGS=0V, VDS=0V, f=1MHz
SWITCHING PARAMETERS
Qg
Total Gate Charge
Qgs
Gate Source Charge
VGS=10V, VDS=400V, ID=12A
Qgd
Gate Drain Charge
tD(on)
tr
tD(off)
Turn-On DelayTime
Turn-On Rise Time
Turn-Off DelayTime
VGS=10V, VDS=250V, ID=12A,
RG=25Ω
tf
Turn-Off Fall Time
trr
Body Diode Reverse Recovery Time IF=12A,dI/dt=100A/µs,VDS=100V
Qrr
Body Diode Reverse Recovery Charge IF=12A,dI/dt=100A/µs,VDS=100V
1
10
µA
±100 nΑ
3.3 3.9 4.5
V
0.36 0.52 Ω
16
S
0.72 1
V
12
A
48
A
1089 1361 1633 pF
134 167 200 pF
10 12.6 15 pF
1.8 3.6 5.4
Ω
30.7 37
nC
7.6 9
nC
13.0 16
nC
29
35
ns
69
83
ns
82
98
ns
55.5 67
ns
231 277 ns
2.82 3.4 µC
A. The value of R θJA is measured with the device in a still air environment with T A =25°C.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial
TJ =25°C.
D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a
maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. L=60mH, IAS=5.5A, VDD=150V, RG=25Ω, Starting TJ=25°C
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev.8.0: April 2014
www.aosmd.com
Page 2 of 6
Share Link: 