NJU6682
*11:As for power supply VREG, provide by the error of the VLCD output with the electronic volume.
It use the measurement system shown below.
VDD
Ra
VR
Rb
V5
XΩ
V
XΩ
VREG%=(VREAL-VIDEAL)/VIDEALX100
- VIDEAL means a ideal value and VREAL
means a measurement value.
- As for the calculation of VIDEAL, refer to
voltage adjustment circuit (6-9-11), the
voltage
adjustment circuit (6-9-11) which used an
electronic volume function.
Vout
*12:The voltage change by the output current prescribes a range within Vlcd X 5%. VLCD=12.0V;(VDD-Vout)=16.0V.
It define a measurement system shown below.
*:Vn shows either of V1-V5 measurement terminal. V/F current supply performance is reduceed to the
minimize because of the low consumption current.
Therefore, when measuring, the current which flows through the voltmeter in the figure, too, becomes not able
to be ignored. When measuring, it requeire enough consideration.
V
Vn
A
V5
Measurement circuit for
Source current
VDD
A
V
Vn
Measurement circuit for
Sink current