TK5530 데이터 시트보기 (PDF) - Atmel Corporation
부품명
상세내역
일치하는 목록
TK5530 Datasheet PDF : 9 Pages
| |||
IDICÒ (Reference
Data Sheet e5530)
Memory size maximum
128 Bit (details see “Coding”)
Memory type
ROM
Programming
Laser cutting
Data rate
RF/32 - RF/64
Encoding
Manchester or Bi-phase
Modulation
AM
Maximum coil voltage
(internally limited) Vpp (I = 5 mA) 16 V
Coding
The memory of the TK5530 can be selected to be a 64- or 128-bit rolling code. In the
non-standard version, the first 8 bits are a customer-specific pattern. This can be
selected by the customer, provided that Atmel agrees to the customer’s proposal. This
pattern is unique within the serial rolling code data stream. The ID code and further bit
informations following the 8-bit header can also be defined within the customer’s
specification.
The set-up of a suitable coding scheme can be provided on customer’s request.
Read Distance
The maximum distance between the base station and the TK5530 mainly depends on
the base station, the coil geometries and the modulation options chosen (see U2270B
Antenna Design Hints and the U2270B data sheet). When generating an appropriate
field with a suitable reader technique, a distance of 10 cm and more can be obtained.
When using the Atmel U2270B demo board, the typical distances in the range of 0 to
5 cm can be achieved. Maximum distance values which are generally valid can not be
given in this data sheet. The exact measuring of the maximum distance should be car-
ried out with the TK5530 being integrated into the specific application.
Ordering Information
Extended Type
Number
Modul.
Data
Rate
Con-
Check- Header
figuration sum
ID
Code
SPQ
(Minimum
Volume)
Minimum
Order Volume
TK5530HM-232-PP Manch. RF/32
64 bit
no
E6
fixed and 10 kpcs
>1 kpcs
check-
unique
(per order,
sum
code
from stock)
TK5530HM-zzz-PP
defined by customer
Note:
1) Definition of customized part number basing on orders for first year volume (300 kpcs)
2) Definition of header, ID code, checksum etc. according to customers data base
3) 8.000 US$ initial cost for metal mask
4) Lead time 5 month
5) Low volume customized application can be covered by TK5550F-PP programming,
for identical application, as TK5530H-zzz-PP.
> 300 kpcs p.a.
6 TK5530
4683A–RFID–02/03
Share Link: 