MAX394CPP 데이터 시트보기 (PDF) - Maxim Integrated
부품명
상세내역
일치하는 목록
MAX394CPP Datasheet PDF : 13 Pages
| |||
Low-Voltage, Quad, SPDT,
CMOS Analog Switch
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to GND
V+ .......................................................................-0.3V to +17V
V- ........................................................................+0.3V to -17V
V+ to V-...............................................................-0.3V to +17V
COM_, NO_, NC_, IN_ (Note 1) ..................(V- - 2V) to (V+ + 2V)
or 30mA, whichever occurs first
Continuous Current, Any Pin...............................................30mA
Peak Current, Any Pin
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above+70°C) ...........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
CERDIP (derate 10.00mW/°C above +70°C) ...............800mW
TSSOP (derate 11.00mW/°C above +70°C) ................879mW
Operating Temperature Ranges
MAX394C_ P .......................................................0°C to +70°C
MAX394E_ P ....................................................-40°C to +85°C
MAX394MJP ..................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 5V ±10%, V- = -5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SWITCH
Analog Signal Range
On-Resistance
On-Resistance Match Between
Channels (Note 4)
On-Resistance Flatness
(Note 4)
NC or NO Off-Leakage Current
(Note 5)
COM Leakage Current
(Note 5)
SYMBOL
CONDITIONS
TEMP.
RANGE
VCOM,
VNO,
VNC
RON
ΔRON
RFLAT(ON)
INC(OFF)
or
INO(OFF)
ICOM(ON)
(Note 3)
V+ = 4.5V, V- = -4.5V,
VNC or VNO = ±3.5V,
ICOM = 10mA,
VINH = 2.4V,
VINL = 0.8V
VNC or VNO = ±3V,
ICOM = 10mA,
V+ = 5V, V- = -5V
VNC or VNO = 3V, 0V,
-3V; ICOM = 10mA,
V+ = 5V; V- = -5V
VCOM = ±4.5V,
VNC or VNO = ±4.5V,
V+ = 5.5V,V- = -5.5V
VCOM = ±4.5V,
VNC or VNO = ±4.5V,
V+ = 5.5V, V- = -5.5V
TA =
+25°C
TA = TMIN
to TMAX
TA =
+25°C
TA = TMIN
to TMAX
TA =
+25°C
TA = TMIN
to TMAX
TA =
+25°C
TA = TMIN
to TMAX
TA =
+25°C
TA = TMIN
to TMAX
C, E
M
C, E, M
C, E, M
C, E, M
C, E, M
C, E, M
C, E
M
C, E
M
C, E
M
C, E
M
MIN
TYP MAX
(Note 2)
UNITS
V-
V+
V
20
35
20
30
Ω
45
0.5
2
Ω
4
4
Ω
6
-0.2 -0.01 +0.2
-0.1 -0.01 +0.1
nA
-2.5
+2.5
-20
+20
-0.4 -0.04 +0.4
-0.2 -0.04 +0.2
nA
-5.0
+5.0
-20
+20
2 _______________________________________________________________________________________
Share Link: 