RF Coaxial Connectors
Assembly Instructions
BBAI-1041 SMZ Right Angle Connectors, Solder Contact, for Braided Cable
FERRULE
BODY
CAP
1. Trim cable to dimensions shown being careful not to nick the braid or center conductor. Tin center
conductor, (DO NOT OVER TIN), then slip ferrule over cable.
2. Insert trimmed cable into tubular extension. This will slide under the braid. The center conductor
will extend into the slotted contact.
3. Slip cable and ferrule up to face of body and crimp in position using ITT Cannon crimp tool and
suitable die set (see table). Solder center conductor to contact. Press cap into body using a flat
punch or ITT Cannon Tool T2921.
Cable
BT2001
BT2002
BT2003
BT3002
RG59B/U
RG62/U
RG140/U
RG179B/U
RG180/U
RG187A/U
RG195A/U
RD179
TZC75024
Die Size
4,52 (.178)
5,18 (.204)
6,81 (.268)
4,52 (.178)
6,48 (.255)
6,48 (.255)
6,48 (.255)
3,25 (.128)
4,52 (.178)
3,25 (.128)
4,52 (.178)
3,84 (.151)
4,52 (.178)
132
Dimensions are shown in mm (inch)
Dimensions subject to change