050-311-7504229 데이터 시트보기 (PDF) - ITT Cannon

부품명

상세내역

일치하는 목록

050-311-7504229

RF Coaxial Connectors

ITT Cannon  

RF Coaxial Connectors

BBAI-1040 SMZ Straight Connectors, Solder Contact, for Braided Cable

Assembly Instructions

FERRULE

REAR BODY ASSEMBLY

CONTACT

(REAR PORTION)

FRONT

INSULATOR

(PLUG ONLY)

1. Trim cable to dimensions shown being careful not to nick the braid or center conductor. Tin center

conductor, (DO NOT OVER TIN) then slip ferrule over cable.

2. Insert trimmed cable into back end of rear body. The tubular extension will slide under the braid.

The tinned end of the center conductor should project 0,75 (.030) beyond the face of the insulator.

Slip ferrule up to hex. Face of rear body and crimp in position using ITT Cannon crimp tool and

suitable die set (see table).

Cable

BT2001

BT2002

BT2003

BT3002

RG59B/U

RG62/U

RG140/U

RG179B/U

RG180/U

RG187A/U

RG195A/U

RD179

TZC75024

Die Size

4,52 (.178)

5,18 (.204)

6,81 (.268)

4,52 (.178)

6,48 (.255)

6,48 (.255)

6,48 (.255)

3,25 (.128)

4,52 (.178)

3,25 (.128)

4,52 (.178)

3,84 (.151)

4,52 (.178)

Assy Insts

3. Add 2,00 (.078) long slug of 24 SWG60/40 tin/lead solder to bore of contact. Assemble contact

onto center conductor with the shoulder of contact flush with insulator as shown. Heat to make

soldered connection.

4. Assemble front insulator over contact (jack front insulator is pre-assembled into front body at the

factory) then slip front body onto rear body and tighten with torque of 0,99 - 1,06 Nm

(140 - 150 in. ozs.)

Dimensions are shown in mm (inch)

Dimensions subject to change 131

Share Link: