RF Coaxial Connectors
Assembly Instructions
AI-770 SMA Flange Mount Connectors, Direct Solder Type for Semi-Rigid Cable
CONTACT
BODY ASSEMBLY
1. Strip cable to dimension shown, do not nick inner conductor.
2. Insert contact over inner conductor and push until it bottoms against the cable dielectric as shown.
Solder contact to inner conductor through solder hole. Trim excess of cable dielectric, if required.
3. Slide contact and cable into rear of body assembly until it seats firmly against insulator in body.
Solder cable to body applying sufficient heat to body for solder to flow, but using minimum heat
cycle.
128
Dimensions are shown in mm (inch)
Dimensions subject to change