050-607-5506899 데이터 시트보기 (PDF) - ITT Cannon

부품명

상세내역

일치하는 목록

050-607-5506899

RF Coaxial Connectors

ITT Cannon  

RF Coaxial Connectors

Assembly Instructions

AI-755 MCX Right Angle Connectors, Direct Solder Type for Times T - Flex Cable

CAP

INSULATION DISC

BODY ASSEMBLY

1. Dip 9,50 (.374) to 12,70 (.500) of both ends of the cable into a solder pot. Flux may be applied to

the ends of the cable prior to dipping, if desired.

2. Trim cable to dimensions shown being careful not to nick the center conductor or braid. Trim

center conductor (DO NOT OVER TIN).

A

2,29 (.090)

B

3,69 (.145)

3. Orientate slot of contact and insulator to be parallel to the cable entry hole as shown.

4. Push cable into body and solder in place.

5. Solder center conductor to center contact (do not over solder).

6. Insert insulation disc (if supplied), into bore then dimple or lightly punch cap into counterbore until

fully home.

7. Install shrink tubing as shown, apply indirect heat to shrink the tubing down.

126

Dimensions are shown in mm (inch)

Dimensions subject to change

Share Link: