FST16292 데이터 시트보기 (PDF) - Fairchild Semiconductor
부품명
상세내역
일치하는 목록
FST16292 Datasheet PDF : 5 Pages
| |||
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC)
DC Switch Voltage (VS)
DC Input Voltage (VIN) (Note 2)
DC Input Diode Current (lIK) VIN<0V
DC Output (IOUT) Sink Current
DC VCC/GND Current (ICC/IGND)
Storage Temperature Range (TSTG)
−0.5V to +7.0V
−0.5V to +7.0V
−0.5V to +7.0V
−50mA
128mA
+/− 100mA
−65°C to +150 °C
Recommended Operating
Conditions
Power Supply Operating (VCC)
Input Voltage (VIN)
Output Voltage (VOUT)
Input Rise and Fall Time (tr, tf)
Switch Control Input
4.0V to 5.5V
0V to 5.5V
0V to 5.5V
0ns/V to 5ns/V
Switch I/O
0ns/V to DC
Free Air Operating Temperature (TA) −40 °C to +85 °C
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: The input and output negative voltage ratings may be exceeded if
the input and output diode current ratings are observed.
DC Electrical Characteristics
Symbol
Parameter
VCC
(V)
TA = −40 °C to +85 °C
Min
Typ
(Note 3)
Max
Units
Conditions
VIK
Clamp Diode Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
II
Input Leakage Current
IOZ
OFF-STATE Leakage Current
RON
Switch On Resistance
(Note 4)
ICC
∆ ICC
Quiescent Supply Current
Increase in ICC per Input
4.5
4.0–5.5
2.0
4.0–5.5
5.5
0
5.5
4.5
4.5
4.5
4.0
5.5
5.5
Note 3: Typical values are at VCC = 5.0V and TA =+25°C
−1.2
V
IIN = −18mA
V
0.8
V
±1.0
µA 0≤ VIN ≤5.5V
10
µA
VIN = 5.5V
±1.0
µA
0 ≤A, B ≤VCC
4
7
Ω
VIN = 0V, IIN = 64mA
4
7
Ω
VIN = 0V, IIN = 30mA
8
12
Ω
VIN = 2.4V, IIN = 15mA
14
20
Ω
VIN = 2.4V, IIN = 15mA
3
µA
VIN = VCC or GND, IOUT = 0
2.5
mA One input at 3.4V
Other inputs at VCC or GND
Note 4: Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the
voltages on the two (A or B) pins.
www.fairchildsemi.com
2
Share Link: 