CY2309(2002) 데이터 시트보기 (PDF) - Cypress Semiconductor

부품명

상세내역

일치하는 목록

CY2309
(Rev.:2002)

Low-cost 3.3V Zero Delay Buffer

Cypress Semiconductor 

CY2305

CY2309

REF. Input to CLKA/CLKB Delay vs. Loading Difference between CLKOUT and CLKA/CLKB Pins

Zero Delay and Skew Control

All outputs should be uniformly loaded to achieve Zero Delay

between the input and output. Since the CLKOUT pin is the

internal feedback to the PLL, its relative loading can adjust the

input-output delay. This is shown in the above graph.

For applications requiring zero input-output delay, all outputs,

including CLKOUT, must be equally loaded. Even if CLKOUT

is not used, it must have a capacitive load, equal to that on

other outputs, for obtaining zero input-output delay. If input to

output delay adjustments are required, use the above graph to

calculate loading differences between the CLKOUT pin and

other outputs.

For zero output-output skew, be sure to load all outputs

equally. For further information refer to the application note

entitled “CY2305 and CY2309 as PCI and SDRAM Buffers.”

Document #: 38-07140 Rev. *C

Page 3 of 13

Share Link: