A1171EEWLT-P 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
일치하는 목록
A1171EEWLT-P Datasheet PDF : 9 Pages
| |||
A1171
Micropower Ultrasensitive Hall Effect Switch
Applications
It is strongly recommended that an external bypass capacitor be
connected (in close proximity to the Hall sensor) between the
supply and ground of the device to reduce both external noise
and noise generated by the chopper stabilization technique. As is
shown in figure 3, a 0.1 μF capacitor is typical.
Extensive applications information on magnets and Hall-effect
sensors is available in the following notes:
• Hall-Effect IC Applications Guide, AN27701
• Hall-Effect Devices: Gluing, Potting, Encapsulating, Lead
Welding and Lead Forming AN27703.1
• Soldering Methods for Allegro Products (SMD and Through-
Hole), AN26009
All are provided in Allegro Electronic Data Book, AMS-702,
and on the Allegro Web site, www.allegromicro.com.
VS
CBYP
0.1 µF
Sensor Outputs
VOUTPS
VDD
A1171
VOUTPN
NC
SELECT
GND
VS
CBYP
0.1 µF
Sensor Outputs
VOUTPS
VDD
A1171
VOUTPN
NC
SELECT
GND
(a)
(b)
Figure 3. Typical Application Circuits: (a) Omnipolar operation, and (b) Unipolar Operation
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Share Link: 