datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

AD1984 데이터 시트보기 (PDF) - Analog Devices

부품명
상세내역
일치하는 목록
AD1984 Datasheet PDF : 20 Pages
First Prev 11 12 13 14 15 16 17 18 19 20
AD1984
Table 3. AD1984 Pin Descriptions (Continued)
Mnemonic
Pin No.
I/O
Description
FILTER/REFERENCE
VREF _FILT
27
MIC_BIAS-B
28
MIC_BIAS-C
29
O
Voltage Reference Filter.
O
Switchable Microphone Bias. For use with Port B (Pins 21, 22).
O
Switchable Microphone Bias. For use with Port C (Pins 23, 24).
Both MIC bias pins are capable of Hi-Z, 0 V, 1.65 V, 3.7 V, and 3.9 V (with 5.0 V on
Pin 33), Hi-Z, 0 V, 1.65 V, 2.86 V, and 3.0 V (with 3.3 V on Pin 33).
DVCORE
1
O
CAUTION: DO NOT APPLY 3.3 V TO THIS PIN!
Filter connection for internal core voltage regulator. This pin must be connected to
filter caps: 10 μF, 1.0 μF, and 0.1μF connected in parallel between Pin 1 and
DVSS (Pin 7).
POWER AND GROUND
DVIO 3.3V
3
I
Link Digital I/O Voltage Reference. 3.3 V
DVSS
DVDD 3.3 V
7
I
Digital supply return (ground).
9
I
Digital supply voltage 3.3 V . This is regulated down to DVCORE on Pin 1 to supply the
internal digital core internal to the AD1984.
AVDD 3.3 V
25, 38
I
CAUTION: DO NOT APPLY 5 V TO THESE PINS!
Analog supply voltage 3.3 V ONLY.
Note: AVDD supplies should be well regulated and filtered as supply noise degrades
audio performance.
MIC_BIAS_IN
33
I
Source power for microphone bias boost circuitry.
5.0 V or 3.3 V
Connect this pin to 5.0 V via a low-pass filter. When connected this way the AD1984 is
capable of providing +3.9 V as a mic bias to all of the mic bias pins (except on
Pin 31).
If 5 V is not available, connect this pin to +3.3 V (AVDD) via a low-pass filter.
The AD1984 produces a mic bias voltage relative to the AVDD supply
(typically 3.0 V @ AVDD = 3.3 V).
AVSS
26, 42
I
Analog supply return (ground). AVSS should be connected to DVSS using a conductive
trace under, or close to, the AD1984.
The symbols used in this table are defined as: I = Input, O = Output, LI = Line Level Input, LO = Line Level Output, HP = Output capable of
driving headphone load, MIC = Input supports microphones with MIC bias and boost amplifier.
Rev. 0 | Page 11 of 20 | January 2007

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]