SK100EL14WD 데이터 시트보기 (PDF) - Semtech Corporation
부품명
상세내역
일치하는 목록
SK100EL14WD Datasheet PDF : 4 Pages
| |||
SK10/100EL14W
HIGH-PER.ORMANCE PRODUCTS
AC Characteristics (continued)
Notes:
1. 10EL circuits are designed to meet the DC specifications shown in the table after thermal equilibrium
has been established. The circuit is in a test socket or mounted on a printed circuit board and
transverse airflow greater than 500 lfpm is maintained. Outputs are terminated through a 50Ω resistor
to VCC –2.0V.
2. 100K circuits are designed to meet the DC specification shown in the table where transverse airflow
greater than 500 lfpm is maintained.
3. Voltages are referenced to VCC = 0V.
4. Skews are specified for identical LOW-to-HIGH or HIGH-to-LOW transitions.
5. Minimum input swing for which AC parameters guaranteed.
6. CMR range is referenced to the most positive side of the differential input signal. Normal operation is
obtained if the high level falls within the specified range and the peak-to-peak voltage lies between
VPP(min) and 1V. The lower end of the CMR range varies 1:1 with VEE and is equal to VEE + 1.3V for
VPP < 500 mV, and VEE + 1.5 for VPP > 500 mV.
7. For standard ECL DC specifications, refer to the ECL Logic Family Standard DC Specifications Data
Sheet.
8. For part ordering descriptions, see HPP Part Ordering Information Data Sheet.
Ordering Information
Ordering Code
SK10EL14WD
SK10EL14WDT
SK100EL14WD
SK100EL14WDT
SK10EL14WU
SK100EL14WU
Package ID
20-SOIC
20-SOIC
20-SOIC
20-SOIC
Die
Die
Contact Information
Division Headquarters
10021 Willow Creek Road
San Diego, CA 92131
Phone: (858) 695-1808
FAX: (858) 695-2633
Revision 1/May 09, 2002
Semtech Corporation
High-Performance Products Division
4
Marketing Group
1111 Comstock Street
Santa Clara, CA 95054
Phone: (408) 566-8776
FAX: (408) 566-8759
www.semtech.com
Share Link: 