74HC4060D,653(2016) 데이터 시트보기 (PDF) - NXP Semiconductors.
부품명
상세내역
일치하는 목록
74HC4060D,653 Datasheet PDF : 25 Pages
| |||
74HC4060; 74HCT4060
14-stage binary ripple counter with oscillator
Rev. 4 — 10 February 2016
Product data sheet
1. General description
The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with
three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and
Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator
configuration allows design of either RC or crystal oscillator circuits. The oscillator may be
replaced by an external clock signal at input RS. In this case, keep the oscillator pins
(RTC and CTC) floating. The counter advances on the HIGH-to-LOW transition of RS. A
HIGH level on MR clears all counter stages and forces all outputs LOW, independent of
the other input conditions. Inputs include clamp diodes. This enables the use of current
limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
All active components on chip
RC or crystal oscillator configuration
Complies with JEDEC standard no. 7 A
Input levels:
For 74HC4060: CMOS level
For 74HCT4060: TTL level
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from 40 C to +85 C and from 40 C to +125 C
3. Applications
Control counters
Timers
Frequency dividers
Time-delay circuits
Share Link: 