73K324BL-IGT 데이터 시트보기 (PDF) - TDK Corporation
부품명
상세내역
일치하는 목록
73K324BL-IGT Datasheet PDF : 26 Pages
| |||
73K222BL
V.22, V.21, Bell 212A, Bell 103
Single-Chip Modem with Integrated Hybrid
CONTROL REGISTER 0
CR0
000
D7
MODUL.
OPTION
BIT NO.
D0
D1
D6
D5
D4
D3
D2
D1
D0
0
TRANSMIT TRANSMIT TRANSMIT TRANSMIT TRANSMIT
ANSWER/
MODE 3
MODE 2
MODE 1
MODE 0
ENABLE
ORIGINATE
NAME
CONDITION
DESCRIPTION
Answer/
Originate
Transmit
Enable
0
Selects answer mode (transmit in high band, receive
in low band).
1
Selects originate mode (transmit in low band, receive in
high band).
0
Disables transmit output at TXA.
1
Enables transmit output at TXA.
Note: TX Enable must be set to 1 to allow Answer Tone
and DTMF Transmission as well as data carriers.
D5, D4, D3, D2
Transmit
Mode
D5 D4 D3 D2 Selects power-down mode. All functions disabled except
0 0 0 0 digital interface.
00
01
Internal synchronous mode. In this mode TXCLK is an
internally derived 1200 Hz signal. Serial input data
appearing at TXD must be valid on the rising edge of
TXCLK. Receive data is clocked out of RXD on the
falling edge of RXCLK.
00
10
External synchronous mode. Operation is identical to
internal synchronous, but TXCLK is connected internally
to EXCLK pin, and a 1200 Hz ± 0.01% clock must be
supplied externally.
00
11
Slave synchronous mode. Same operation as other
synchronous modes. TXCLK is connected internally to
the RXCLK pin in this mode.
0 1 0 0 Selects PSK asynchronous mode - 8 bits/character
(1 start bit, 6 data bits, 1 stop bit).
0 1 0 1 Selects PSK asynchronous mode - 9 bits/character
(1 start bit, 7 data bits, 1 stop bit).
0 1 1 0 Selects PSK asynchronous mode - 10 bits/character
(1 start bit, 8 data bits, 1 stop bit).
0 1 1 1 Selects PSK asynchronous mode - 11 bits/character
(1 start bit, 8 data bits, Parity and 1 or 2 stop bits).
1 1 0 0 Selects FSK operation.
D6
0
Not used; must be written as a “0.”
9
Share Link: 