LC863428A 데이터 시트보기 (PDF) - SANYO -> Panasonic

부품명

상세내역

일치하는 목록

LC863428A

8-Bit Single-Chip Microcontroller

SANYO -> Panasonic 

LC863432A/28A/24A/20A/16A

Terminal

I/O

Function Description

Option

Port 7

•4-bit input/output port

P70

I/O

P71 to P73

Input or output can be specified for each bit

P70: I/O with programmable pull-up resister

P71 to P73: CMOS output/input with programmable pull-up

resister

•Other function

P70 INT0 input/HOLD release input/

Nch-Tr. output for wachdog timer

P71 INT1 input/HOLD release input

P72 INT2 input/Timer 0 event input

P73 INT3 input (noise rejection filter connected)/

Timer 0 event input

Interrupt receiver format, vector addresses

rising falling rising/ H level L level vector

falling

INT0 enable enable disable enable enable 03H

INT1 enable enable disable enable enable 0BH

INT2 enable enable enable disable disable 13H

INT3 enable enable enable disable disable 1BH

Note: A capacitor of at least 10µF must be inserted between VDD and VSS when using this IC.

• Output form and existance of pull-up resistor for all ports can be specified for each bit.

• Programmable pull-up resistor is always connected regardless of port option, CMOS or N-ch open drain output in port 1.

• Port status in reset

Terminal

Port 0

Port 1

I/O

Pull-up resistor status at selecting CMOS output option

I

Pull-up resistor OFF, ON after reset release

I

Programmable pull-up resistor OFF

No.6846-8/19

Share Link: