ISL9016
Pin Configuration
ISL9016
(6 LD 1.6x1.6 µTDFN)
TOP VIEW
VIN 1
6 VOUT1
GND 2
5 VOUT2
EN2 3
4 EN1
Pin Descriptions
PIN #
1
2
3
4
5
6
-
PIN NAME
DESCRIPTION
VIN Supply Voltage/LDO Input. Connect a 1µF capacitor to GND.
GND GND is the connection to system ground. Connect to PCB Ground plane.
EN2 LDO2 Enable pin. Enable = High, Disable = Low. A 100k resistor should be connected between EN2 and the control voltage rail.
Do NOT leave it floating.
EN1 LDO1 Enable pin. Enable = High, Disable = Low. A 100k resistor should be connected between EN1 and the control voltage rail.
Do NOT leave it floating.
VOUT2 LDO2 Output. Connect capacitor with a value from 1µF to 4.7µF to GND (1µF recommended).
VOUT1 LDO1 Output. Connect capacitor with a value from 1µF to 4.7µF to GND (1µF recommended).
E-Pad Connect the e-pad to the system ground.
FN6832 Rev 1.00
May 16, 2011
Page 2 of 11