ML7012-06 데이터 시트보기 (PDF) - LAPIS Semiconductor Co., Ltd.

부품명

상세내역

일치하는 목록

ML7012-06

2400 bps Single Chip Full Duplex Data Modem with Protocol

LAPIS Semiconductor Co., Ltd. 

FEDL7012-06-02

ML7012-06

AN EXAMPLE OF LEVEL DIAGRAM

1. Modem transmission, VDD  3 V

AOUT = -20dBm, RCAO = -20dBm, TXAN = -14dBm, TXAP = -14dBm, LINE = -16dBm

(S34 = 2dB(default), R5/R4 = 2, Loss at a transformer = 2dB)

2. DTMF Transmission, VDD  3 V DTMF high group level, DTMF low group level is approx. 1dB lower than

below.

AOUT = -14.5dBm, RCAO = -14.5dBm, TXAN = -8.5dBm, TXAP = -8.5dBm, LINE = -10.5dBm

(S35 = 0dB(default), R5/R4 = 2, Loss at a transformer = 2dB)

3. Modem transmission, VDD  2.7V

AOUT = -20dBm, RCAO = -20dBm, TXAN = -15.9dBm, TXAP = -15.9dBm, LINE = -17.9dBm

(S34 = 2dB(default), R5/R4 = 1.6, Loss at a transformer = 2dB)

4. DTMF Transmission, VDD  2.7V DTMF high group level, DTMF low group level is approx. 1dB lower than

below.

AOUT = -14.5dBm, RCAO = -14.5dBm, TXAN = -10.4dBm, TXAP = -10.4dBm, LINE = -12.4dBm

(S35 = 0dB(default), R5/R4 = 1.6, Loss at a transformer = 2dB)

5. Modem receive (max.)

LINE= -9dBm, at connection of R6 and R7 = -11dBm, GSR= -15dBm,

(R8/R7 = 0.63 = -4dB, Loss at a transformer = 2dB)

6. Modem receive (min.)

LINE= -40dBm, at connection of R6 and R7 = -42dBm, GSR= -46dBm,

(R8/R7 = 0.63 = -4dB, Loss at a transformer = 2dB)

CONNECTION OF CRYSTAL OSCILLATOR

Connect a 11.0592 MHz crystal and a 1 M feedback resistor between OSC0 and OSC1.

The values of capacitors C01 and C02 connected between OSC0 and GND, and OSC1 and GND vary with the load

capacitance of the crystal and the wiring capacitance of the board. Set the values by the crystal manufacture’s

matching evaluation.

If an external clock is used, input it to OSC0.

C01

15pF

11.0592 MHz

C02

15pF

OSC0

ROSC

1 M

OSC1

20/23

Share Link: