RV5C386A
2.1-3 SCRATCH3
Scratch Bit 3
SCRATCH3
0
1
Description
(Default setting)
The SCRATCH3 bit is intended for scratching and accepts the reading and writing of 0 and 1. The SCRATCH3 bit
will be set to 0 when the XSTP bit is set to 1 in the control register 2.
2.1-4 TEST
TEST
0
1
Test Bit
Normal operation mode
Test mode
Description
The TEST bit is used only for testing in the factory and should normally be set to 0.
(Default setting)
11