R1170D15A-T1 데이터 시트보기 (PDF) - RICOH Co.,Ltd.
부품명
상세내역
일치하는 목록
R1170D15A-T1 Datasheet PDF : 16 Pages
| |||
s Technical Notes on External Components and Typical Application
Phase Compensation
In these ICs, phase compensation is made with Output capacitor for securing stable operation even
if the load current is varied. For this purpose, use as much as 10µF Capacitor as CL.
If you use a tantalum type capacitor and ESR value of the capacitor is large, output might be
unstable. Evaluate your circuit with considering frequency characteristics. Further, refer to the
Typical Characteristics No.12.
Mounting on PCB
Make VDD and GND lines sufficient. If the impedance of these is high, current flows, the noise might
be picked up or be a cause of unstable operation. Further use as much as 10µF Capacitor between
VDD pin and GND pin as close as possible.
Set an Output capcitor between VOUT pin and GND pin for phase compensation as close as possible.
(Refer to the example of typical application)
Example of the typical application of R1170HxxxB
CE
IN
CI
VDD R1170Hxx1B
GND
VOUT
OUT
CL
CI=10µF(Ceramic), CL=10µF(Ceramic)
Rev. 1.10
-7-
Share Link: 