OPB780Z 데이터 시트보기 (PDF) - Optek Technology
부품명
상세내역
일치하는 목록
OPB780Z Datasheet PDF : 6 Pages
| |||
Reflective Color Sensor Assembly
OPB780Z
LED
Electro-Optical Characteristics of LED1 (TA = 25°C unless otherwise noted) (See OVLAW4CB6 for more info.)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
IV(1)
Luminous Intensity
- 1.0 -
cd IF = 20 mA
VF
Forward Voltage
2.8 3.4 3.9
V IF = 5 mA
IR
Reverse Current
-
-
10
µA VR = 5 V
Sensor
Recommended Operating Conditions1
SYMBOL
PARAMETER
MIN TYP MAX UNITS
RECOMMENDED CONDITIONS
VDD Supply Voltage
2.7
VIH High-Level Input Voltage
2.0
VIL Low-Level Input Voltage
0.0
TA
Operating Free-Air Temperature
Range
-40
5 5.5
-
VDD
- 0.8
- +70
V
-
V VDD = 2.7 V to 5.5 V
V VDD = 2.7 V to 5.5 V
°C
-
Sensor
Electrical Characteristics1 (TA = 25° C, VDD = 5 V unless otherwise noted)
SYMBOL
PARAMETER
VOH High-Level Output Voltage 3
VOL Low-Level Output Voltage 3
IIH
High-Level Input Current
IIL
Low-Level Input Current
IDD Supply Current
-
Full-Scale Frequency 2
MIN TYP MAX UNITS
TEST CONDITIONS
- 4.5 -
V IOH = -4 mA
- 0.25 -
V IOL = 4 mA
-
-
5
µ
-
-
-
5
µ
-
-
2
3
mA Power on
- 600 -
kHz
-
-
Temperature Coefficient of
Output Frequency
tr, tf
Typical Temperature Rise Time
Typical Temperature Fall Time
-
±200
-
ppm/°C
λ ≤ 700 nm, -25° C ≤
ppm/° C
TA ≤ 70° C / ± 200
- 100 - µ sec.
-
Notes:
(1) All voltage values are with respect to GND.
(2) Full-scale frequency is the maximum operating frequency of the device without saturation.
(3) Output interface of device is designed to drive a standard TTL or CMOS logic input over short distances. If lines greater than 12 inches are
used on output, a buffer or line driver is recommended.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 04/07
Page 3 of 6
Share Link: 