LUPA-1300-C(2007) 데이터 시트보기 (PDF) - Cypress Semiconductor

부품명

상세내역

일치하는 목록

LUPA-1300-C
(Rev.:2007)

1.3MPxl High Speed CMOS Image Sensor

Cypress Semiconductor 

LUPA-1300

Recommended operating conditions

Table 5. Recommended operation conditions

Symbol

Parameter

Typ

Unit

Vdda

Power supply column read out module.

5

V

Vdd

Power supply digital modules

5

V

Vddr

Power supply logic for drivers

5

V

Voo

Power supply output stages

5

V

Vres

Power supply reset drivers

6

V

Vres_ds

Power supply multiple slope reset driver

4.5

V

Vmem_h

Power supply memory element (high level)

6

V

Vmem_l

Power supply memory element (low level)

4.5

V

Vpix

Power supply pixel array

4.5

V

Vstable

Power supply output stages. Decouples noise on the Voo supply from the

5.5

V

output signal.

Notes

2. All parameters are characterized for DC conditions after thermal equilibrium has been established.

3. Unused inputs must always be tied to an appropriate logic level, e.g. either VDD or GND.

4. This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields; however it is recommended that normal precautions

be taken to avoid application of any voltages higher than the maximum rated voltages to this high impedance circuit.

5. All power supplies should be sufficiently decoupled because spikes and drops in the power supplies will be immediately visible in the analog output signals.

Document Number: 38-05711 Rev. *C

Page 7 of 32

[+] Feedback

Share Link: