GP1A05A2 데이터 시트보기 (PDF) - Sharp Electronics

부품명

상세내역

일치하는 목록

GP1A05A2

OPIC Photointerrupter with Connector

Sharp Electronics 

GP1A05A2

s Recommended Connectors on the Inserted Side

x JAPAN SOLDERLESS TERMINAL MFG. CO., LTD. made

Housing Model No.

AWG

size

Special

terminal

Model. No.

AWG

28 to 22

AWG

30 to 28

H3P-SHF-AA

Material

Model No.

Brass

SHF-001T-0.8SS

Copper phosphide SHF-001T-0.8BS

Brass

SHF-002T-0.8SS

Copper phosphide SHF-002T-0.8BS

AWG

size

AWG

27 to 22

AWG

30 to 28

(Natural color • bulk)

S3P-SHF-1

Material

Model No.

Brass

SHF-001T-0.8P

Copper phosphide

−

Brass

SHF-002T-0.8P

Copper phosphide

−

s Precautions for Use

1. It is recommended that a by-pass capacitor of more than 0.01µF be added between VCC and GND near the device in order to

stabilize power supply line.

2. Please don't carry out immersion cleaning or ultrasonic cleaning to avoid keeping solvent inside case of this device.

3. Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.

However, do not perform the above cleaning using a soft cloth with cleaning solvent in the marking portion.

In this case, use only the following type of cleaning solvent used for wiping off :

Ethyl alcohol, Methyl alcohol, Isopropyl alcohol,

When the cleaning solvents except for specified materials are used, please consult us.

4. As for other general cautions, refer to the chapter "Precautions for Use. "

Share Link: