CDB5378 데이터 시트보기 (PDF) - Cirrus Logic

부품명

상세내역

일치하는 목록

CDB5378

Single-channel Seismic Evaluation System

Cirrus Logic 

CDB5378

1. INITIAL SETUP

1.1 Kit Contents

The CDB5378 evaluation kit includes:

• CDB5378 Evaluation Board

• USB Cable (A to B)

• Software Download Information Card

The following are required to operate CDB5378, and are not included:

• Bipolar Power Supply with Banana Jack Outputs (+/-12 V @ 100 mA)

• Banana Jack Cables (4x)

• PC Running Windows 2000 or XP with an Available USB Port

• Internet Access to Download the Evaluation Software

1.2 Hardware Setup

To set up the CDB5378 evaluation board:

• Set all jumpers and DIP switches to their default settings (see next sections).

• With power off, connect the CDB5378 power inputs to the power supply outputs.

VA- = -12 V

VA+ = +12 V

GND = 0 V

VD = +12 V

• Connect the USB cable between the CDB5378 USB connector and the PC USB port.

• Proceed to the Software Setup section to install the evaluation software and USB driver.

DS639DB3

5

Share Link: