2N6784_ 데이터 시트보기 (PDF) - Microsemi Corporation
부품명
상세내역
일치하는 목록
2N6784_ Datasheet PDF : 4 Pages
| |||
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http: //www.microsemi.com
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
PACKAGE DIMENSIONS
Dimensions
Ltr
Inches
Millimeters Notes
Min Max Min Max
CD .305 .355 7.75 9.02
CH .160 .180 4.07 4.57
HD .335 .370 8.51 9.39
h .009 .041 0.23 1.04
J .028 .034 0.72 0.86 2
k .029 .045 0.74 1.14 3
LD .016 .021 0.41 0.53 7, 8
LL .500 .750 12.7 19.05 7, 8
LS
.200 TP
5.08 TP
6
LU .016 .019 0.41 0.48 7, 8
L1
.050
1.27 7, 8
L2 .250
6.35
7, 8
P .070
1.78
5
Q
.050
1.27 4
r
.010
0.25 9
α
45° TP
45° TP
6
NOTES:
1 Dimensions are in inches. Millimeters are given for general information only.
2 Beyond radius (r) maximum, j shall be held for a minimum length of .011 (0.028 mm).
3 Dimension k measured from maximum HD.
4 Outline in this zone is not controlled.
5 Dimension CD shall not vary more than .010 (0.25 mm) in zone P. This zone is controlled for automatic handling.
6 Leads at gauge plane .054 +.001, -.000 (1.37 +0.03, -0.00 mm) below seating plane shall be within .007 (0.18 mm) radius of
true position (TP) at maximum material condition (MMC) relative to tab at MMC.
7 LU applies between L1 and L2. LD applies between L2 and L minimum. Diameter is uncontrolled in L1 and beyond LL
minimum.
8 All three leads.
9 Radius (r) applies to both inside corners of tab.
10 Drain is electrically connected to the case.
11 In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 1. Physical dimensions for TO-205AF.
T4-LDS-0176 Rev. 1 (101183)
Page 3 of 4
Share Link: 