datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크
HOME  >>>  Philips  >>> LPC2210 PDF

LPC2210 Datasheet PDF - Philips Electronics

부품명
상세내역
제조사
Other PDF
  no available.
PDF
LPC2210 Datasheet PDF : LPC2210 pdf     
LPC2220 image

General description
The LPC2210/2220 microcontrollers are based on a 32/16 bit ARM7TDMI-S CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.

Features
Key features
■ 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 and TFBGA144 package.
■ 16/64 kB on-chip static RAM (LPC2210/2220).
■ Serial boot-loader using UART0 provides in-system download and programming capabilities.
■ EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high speed real-time tracing of instruction execution.
■ Eight channel 10-bit A/D converter with conversion time as low as 2.44 µs.
■ Two 32-bit timers (LPC2220 also external event counters) with four capture and four compare channels, PWM unit (six outputs), Real-Time Clock (RTC) and watchdog.
■ Multiple serial interfaces including two UARTs (16C550), Fast I2C-bus (400 kbit/s) and two SPIs. On the LPC2220 a Synchronous Serial Port (SSP) with data buffers and variable length transfers can be selected to replace one SPI.
■ Vectored Interrupt Controller (VIC) with configurable priorities and vector addresses.
■ Configurable external memory interface with up to four banks, each up to 16 MB and 8/16/32 bit data width.
■ Up to 76 general purpose I/O pins (5 V tolerant). Up to nine edge or level sensitive external interrupt pins available.
■ 60/75 MHz (LPC2210/2220) maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100 µs.
■ On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz and with external oscillator up to 50 MHz.
■ Power saving modes include Idle and Power-down.
■ Processor wake-up from Power-down mode via external interrupt.
■ Individual enable/disable of peripheral functions for power optimization.
■ Dual power supply:
   ◆ CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ± 0.15 V).
   ◆ I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads. 16/32-bit ARM7TDMI-S processor.

 

부품명
상세내역
PDF
제조사
16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface
NXP Semiconductors.
16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface
NXP Semiconductors.
16/32-bit ARM microcontroller with CAN, 10-bit ADC and external memory interface
NXP Semiconductors.
16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface
NXP Semiconductors.
Single-chip 16-bit/32-bit microcontrollers; 8 kB/16 kB/32 kB flash with ISP/IAP, fast ports and 10-bit ADC
NXP Semiconductors.
Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC
NXP Semiconductors.
Single-chip 16-bit/32-bit micro; 512 kB flash, Ethernet, CAN, LCD, USB 2.0 device/host/OTG, external memory interface
NXP Semiconductors.
Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN
NXP Semiconductors.
Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC
NXP Semiconductors.
Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP flash with 10-bit ADC and DAC
NXP Semiconductors.

Share Link : 

English 简体中文 日本語 русский español

All Rights Reserved© datasheetbank.com [ 개인정보 보호정책 ] [ 요청 데이타시트 ][ 제휴문의 ]