datasheetbank_Logo    전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크
부품번호
  >>>  MINILOGIC  >>> ML1001-3U PDF

ML1001-3U 데이터시트 - Minilogic Device Corporation Limited

부품번호상세내용제조사
ML1001-3U ML1001 Series Static LCD COG Driver MINILOGIC
Minilogic Device Corporation Limited MINILOGIC
다른 PDF  존재하지 않습니다.
ML1001-3U 데이타시트 PDF : ML1001-3U pdf   
ML1001 image

General Description
ML1001 static LCD COG (chip on glass) driver is 40 segments LCD driver with gold bump. It can be cascaded to form a single piece of 80 or 120 segments LCD drivers. It targets at custom TN LCD COG Module product which requires the best quality of TN LCD technology. With the use of ML1001 series driver, it offers the best contrast, the widest viewing angle, the widest range of operating voltage and the widest range of operating temperature when compared to the multiplex method.
Our ML1001 includes an internal 32kHz oscillator, a 40-bit shift register, a 40-bit data register, a 16-bit segment driver, a 24-bit segment driver, two common drivers, a blink control circuit, a power-up reset circuit and a frequency divider which offer the necessary clock signals for Blink control, segment & common driver circuit.
Through the DIN pin, the display data is serially shifted into the 40-bit shift register at the rising edge of DCLK signal. The display data, which is going to be displayed on the attached LCD, is then stored in the 40-bit data register at the rising edge of the LOAD signal.
Other features like blinking of the display data by the BEN and BCLK, disable the internal oscillator by the OEN, input an external clock signal to the FIN, and enable or disable the segment and common driver by the SEN1, SEN2, CEN1A and CEN1B, are included.

Features
● A Gold Bump Chip without external component.
● Logic & LCD power supply: 2.0V to 6.0V
● Typical Current consumption: 25uA at VIN = 3V & no load condition.
● Number of segments: 40
● Cascade the ML1001 to form a single piece of 80 or 120 segments LCD driver.
● Simple 3 pin microcontroller interface through DIN, DCLK & LOAD.
● Blink of the display data.
● Offer best contrast and widest viewing angle of TNLCD technology.
● No temperature compensation needed for Topr = -40oC to 80oC.

Application
♦ Instrument LCD Module
♦ Telephone LCD Module
♦ Automotive LCD Module
♦ Handheld Device LCD Module

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14 

 

Other manufacturer searches related to ML1001-3U

부품번호상세내용PDF제조사
COG-VL248160 248x160 dots, FSTN, black & white, positive, transflective, LCD graphic module. COG-VL248160 View Varitronix international limited
BO320240B COG package LCD driver only BO320240B View BOLYMIN Inc
COG-VLGT6566-04 LCD Module Type COG-VLGT6566-04 View Varitronix international limited
BO6464A FSTN Transflective LCD, COG package Built-in driver PCF8548, serial I2C data bus BO6464A View BOLYMIN Inc
BD9206EFV LED Driver Series for LCD Backlight Simple Structure Constant Current Backlight Driver for LCD panels (Non-step type) BD9206EFV View ROHM Semiconductor
MSM5221 56-DOT STATIC LCD DRIVER MSM5221 View Oki Electric Industry
MSM58292 5-DIGIT STATIC LCD DRIVER MSM58292 View Oki Electric Industry
COG-T240MCQ-01 SPECIFICATION OF MODULE COG-T240MCQ-01 View Varitronix international limited
COG-C177MVH MODULE SPEC COG-C177MVH View Varitronix international limited
S-00201G LCD BACK LIGHT, COG TYPE S-00201G View Para Light Electronics

링크 공유 : 

English 简体中文 日本語 русский español


All Rights Reserved © datasheetbank.com 2014 - 2019  [ 개인정보 보호정책 ] [ 데이터시트 요청하기 ]